皮皮学,免费搜题
登录
logo - 刷刷题
搜题
【简答题】
How does a place become a World Heritage Site? It takes a lot of people to decide. 1)If a country wants one of its places to be on the World Heritage List, it has to ask UNESCO. The place must be important and special. UNESCO put the Great Wall on the list in 1987 because, it said, it was a great part of Chinese culture and beautifully made to go with the land.When a country asks, it must also make a plan for taking care of the place. 2)The World Heritage Committee of UNESCO talks about different places and decides whether to put them on the list. The committee meets every June. Many experts help the committee to decide. 3)After a new place goes on the list, UNESCO gives money to help keep it looking good.If a place is in serious danger, it may be put on the List of World Heritage Sites in Danger. UNESCO gives special care and help to those places. 4)Countries have to give UNESCO regular reports about places on the list. If UNESCO thinks a country isn’t taking good enough care of a place, the site will be taken off the list. 小题1:The passage implies that _____. A.becoming a world heritage site takes hard work B.a place with beautiful scenery is often on the World Heritage List C.a place which was taken good care of is often on the World Heritage List D.the Great Wall became a World Heritage Site for its long history. 小题2:If a place successfully becomes a World Heritage Site, the country _____. A.can ask UNESCO for more money and help B.should continue to take special care of it C.won’t take trouble of caring for it D.will try to put it on the List of World Heritage Sites in Danger 小题3:The passage mainly discusses ______. A.how the World Heritage Committee of UNESCO decides a World Heritage Site B.how the World Heritage Committee of UNESCO protects a World Heritage Site C.how the Great Wall becomes a World Heritage Site D.how a place becomes a World Heritage Site 小题4:The purpose of putting a place on the World Heritage List is _____. A.to attract more tourists from other countries B.to get more money and help from other countries C.to have it taken better care of D.to make it known to other countries
手机使用
分享
复制链接
新浪微博
分享QQ
微信扫一扫
微信内点击右上角“…”即可分享
反馈
参考答案:
举一反三
【简答题】关于以下对测量不确定度的要求,说法正确的是 ( )。 对交流电压的测量,有效值的总不确定度应在 ± 3 %范围内 对直流电压的测量,一般要求测量系统测量试验电压算术平均值的测量总不确定度应不超过 ± 4 % 测量直流电压的纹波幅值时,要求其总不确定度不超过 ± 8 %的纹波幅值 测量直流电压的纹波幅值时,要求其总不确定度不超过 ± 2 %的直流电压平均值。
【多选题】下列选项中,关于施工中距离测量的说法,正确的包括( )。
A.
根据不同的精度要求,距离测量有简单量距和复杂量距两种方法
B.
根据不同的精度要求,距离测量有普通量距和精密量距两种方法
C.
复杂量距时所量长度一般都要加尺长、温度和高差三项改正数,有时必须考虑垂曲改正
D.
测距方法,先用经纬仪或以目估进行定线
E.
精度要求,为了校核并提高精度,一般要求进行往返丈量
【多选题】下列关于测量仪器的计量特性说法不正确的是()。
A.
测量仪器的稳定性是指“测量一起保持其计量特性随时间恒定的能力”,不可以进行定量的表征
B.
测量仪器的准确度是指“测量仪器给出接近于真值的响应的能力”,是定量的概念
C.
测量仪器的准确度等级是指“符合一定的计量要求,使误差保持在规定极限以内的测量仪器的等级、级别”,准确度等级是在规定的极限条件下,按照测量仪器的计量性能所能达到的允许误差所划分的仪器的等级或级别
D.
测量仪器示值误差是指“测量仪器示值与对应输入量的真值之差”
【单选题】图示三种受压杆件,杆1,杆2和杆3中的最大压应力分别用 σ max1 、 σ max2 和 σ max3 表示,它们之间的关系是 。
A.
σ max1 max2max3
B.
σ max1 max2=σ max3
C.
σ max1 max3max2
D.
σ max1 =σ max3 max2
【多选题】要把宏伟蓝图变为现实,要把行动纲领落到实处,就要加强党中央权威和集中统一领导,把党的领导体现和落实到()等各个方面。
A.
经济、政治、文化、社会、生态文明建设
B.
国防军队
C.
祖国统一
D.
外交
E.
党的建设
【多选题】要加强党中央权威和集中统一领导,把党的领导体现和落实到( )生态文明建设和国防军队、祖国统一、外交、党的建设等各个方面。
A.
经济
B.
政治
C.
文化
D.
社会
【判断题】轮廓的最大高度比轮廓的算术平均偏差更能客观全面地反映表面微观几何形状特性。()
A.
正确
B.
错误
【判断题】轮廓支承长度率能反映表面的耐磨性,一般情况下其值越大,零件表面的耐磨性越好。
A.
正确
B.
错误
【单选题】操作系统将CPU的时间资源划分成极短的时间片,轮流分配给各终端用户,使终端用户单独分享CPU的时间片,有独占计算机的感觉,这种操作系统称为______。
A.
实时操作系统
B.
批处理操作系统
C.
分时操作系统
D.
操作系统分布式
【单选题】关于以下对测量不确定度的要求,说法正确的是
A.
对交流电压的测量,有效值的总不确定度应在±3%范围内
B.
对直流电压的测量,一般要求测量系统测量试验电压算术平均值的测量总不确定度应不超过±4%
C.
测量直流电压的纹波幅值时,要求其总不确定度不超过±8%的纹波幅值
D.
测量直流电压的纹波幅值时,要求其总不确定度不超过±2%的直流电压平均值
相关题目:
参考解析:
知识点:
题目纠错 0
发布
创建自己的小题库 - 刷刷题