皮皮学,免费搜题
登录
logo - 刷刷题
搜题
【简答题】
The first time I saw Carlos I would never have believed he was going to change my life. I had my arms full of books and I was tearing into the classroom when I ran into something solid. It was Carlos. “My, you’re tall,” he said. Of course, the class began to laugh. Angry, I walked to my seat without a word. I glanced back to see if Reed Harrington was laughing with the rest. That would be the last straw. But Reed was studying chemistry and did not seem to be aware of anything else. I didn’t know why I considered Reed my friend. Maybe just because he was a good two inches taller than I. Anyway, every time I blew out my birthday candles and made a wish, it was for a date with Reed Harrington. “Take that seat,” Mr. McCarthy told the proud newcomer Carlos, pointing to the only empty one, in the back of the room. Carlos smiled broadly. “But I need a couple of dictionaries.” Again the class laughed, but now they were laughing with Carlos, not at him. He had been here only 10 minutes and already he had them on his side. It was the school elections that made me think of Carlos again. Reed Harrington was voted president and Carlos vice president. “How come?” I kept asking myself. “How come this shrimp(虾) who’s only been in town for a little over a month gets to be so popular.” So on that morning, I stopped Carlos and said, “It doesn’t seem to bother you—being short.” He looked up at me. “Of course I mind being short. But there isn’t anything I can do about it. When I realized I was going to have to spend my life in this undersized skin, I just decided to make the best of it and concentrate on being myself.” “You seem to get along great,” I admitted. “But what about me? Nobody wants to date a girl taller than he is.” “The trouble with you is you’re afraid to be yourself. You’re smart. And you could be pretty. In fact, you might be more than pretty.” I felt myself turning red... 小题1: Which of the following is true according to the passage? A.The writer cared much about Reed’s attitude. B.Carlos isn’t popular with the classmates. C.The writer is always confident with herself. D.Carlos always makes fun of the writer. 小题2: From the passage, we can conclude _______________. A.Carlos is as tall as the writer B.Carlos fell love with the writer later C.the writer is very tall D.Reed, Carlos and the writer became good friends later 小题3: What can we use to describe Carlos’ character? A.Handsome and proud B.Humorous and confident C.Diligent and helpful D.Hardworking and popular 小题4: What’s the best title of the passage? A.A girl and a boy. B.My shortcomings. C.My helpful classmates. D.A change in my life.
手机使用
分享
复制链接
新浪微博
分享QQ
微信扫一扫
微信内点击右上角“…”即可分享
反馈
参考答案:
举一反三
【单选题】沪深300股指期货对应的标的指数采用的编制方法是()。
A.
简单股票价格算术平均法
B.
修正的简单股票价格算术平均法
C.
几何平均法
D.
加权股票价格平均法
【单选题】沪深300指数期货对应的标的指数采用的编制方法是______。
A.
简单股票价格算术平均法
B.
修正的简单股票价格算术平均法
C.
几何平均法
D.
加权股票价格平均法
【单选题】根据UCP600规定,如果信用证对保险金额未做规定,则保险金额
A.
不低于发票金额即可
B.
可以是任意金额
C.
由买卖双方协商确定
D.
至少为货物CIF或CIP金额的1.1倍
【单选题】沪深300股指期货对应的标的指数采用的编制方法是( )。、
A.
简单股票价格算术平均法
B.
修正的简单股票价格算术平均法
C.
几何平均法
D.
加权股票价格平均法
【判断题】正式的亲属关系是由系谱学礼仪规范定义的关系,这种关系合成一体,一成不变,而实践亲属关系是其界限和定义与使用该关系的人和场合一样多、且一样多变的关系。
A.
正确
B.
错误
【单选题】与截面为700mm×700mm的框架柱相连的某截面为400mm×600mm的框架梁,纵筋采用HRB335级钢( ),箍筋采用HPB235级钢(φ);其梁端上部纵向钢筋系按截面计算配置。假设该框架梁抗震等级为三级,试问,该梁端上部和下部纵向钢筋面积(配筋率)及箍筋按下列何项配置时,才能全部满足《高层建筑混凝土结构技术规程》JGJ3-2002的构造要求? 提示:①下列各选项纵筋配筋率和箍筋面积配筋率均...
A.
上部纵筋As上=5680mm2(p上=2.70%),下部纵筋As下=4826mm2(p下=2.30%),四肢箍筋φ10@100
B.
上部纵筋As上=3695mm2(p上=1.76%),下部纵筋As下=1017mm2(p下=0.48%),四肢箍筋φ8@100
C.
上部纵筋As上=5180mm2(p上=2.47%),下部纵筋As下=3079mm2(p下= 1.47%),四肢箍筋φ8@100
D.
上部纵筋As上=5180mm2(p上=2.47%),下部纵筋As下=3927mm2(p下= 1.87%),四肢箍筋φ10@100
【判断题】一般汽车差速器壳体轴承座孔与半轴齿轮轴颈的配合间隙应不大于 0 . 15mm 。
A.
正确
B.
错误
【单选题】梁上部钢筋的直径为18mm,梁下部钢筋的直径为22mm。梁上部钢筋的间距为( )。
A.
不小于30mm
B.
不小于27mm
C.
不小于25mm
D.
不小于18mm
【单选题】根据上方受力钢筋的排列要求示意图,假设纵向钢筋直径均为16mm,则该梁上部纵向钢筋的净距可以定为(),下部纵向钢筋的净距可以定为()。
A.
25mm;18mm
B.
30mm;25mm
C.
25mm;25mm
D.
30mm;18mm
【判断题】钻孔时的背吃刀量(切削深度)等于钻头的半径。
A.
正确
B.
错误
相关题目:
参考解析:
知识点:
题目纠错 0
发布
创建自己的小题库 - 刷刷题