皮皮学,免费搜题
登录
logo - 刷刷题
搜题
【单选题】
The prefix Mach is used to describe supersonic speed. It was named for Ernst Mach (1838-1916), a Czech-born Austrian physicist, who contributed to the study of sound. When twice the speed of sound, it is Mach 2. When it is near but below the speed of sound, its speed can be designated at less than Mach 1. for example, Mach 90. Mach is defined as 'the ratio of the velocity of a rocket or a jet to the velocity of sound in the medium being considered.' When a plane passes the sound barrier-flying faster than sound travels' listeners in the area hear thunderclaps, but the pilot of the plane does not hear them. Sound is produced by vibrations of an object and is transmitted by alternate increase and decrease in pressure that radiate outward through a material media of molecules--somewhat like waves spreading out on a pond after a rock has been tossed into it. The frequency of sound is determined by the number of times the vibrating waves undulate per second and is measured in cycles per second. The slower the cycle of waves, the lower the frequency. As frequencies increase, the sound is higher in pitch. Sound is audible to human beings only if the frequency falls within a certain range. The human ear is usually not sensitive to frequencies of fewer than 20 vibrations per second, or more than about 20,000 vibrations per second--although this range varies among individuals. Anything at a pitch higher than the human ear can hear is termed ultrasonic. Intensity, or loudness, is the strength of the pressure of these radiating waves and is measured in decibels. The human ear responds to intensity in a range from zero to 120 decibels. Any sound with pressure over 120 decibels is painful to the human ear. The speed of sound is generally placed at 1088 feet per second at sea level at 32 degrees Fahrenheit. It varies in other temperatures and in different media. Sound travels faster in water than in air, and even faster in iron and steel. It travels a mile in 5 seconds in air, it does a mile under water in 1 second, and it travels through iron in 1/3 second. It travels through ice cold vapor at approximately 4,708 feet per second ice-cold water, 4,938 granite, 12,960 hardwood, 12,620 brick, 11,960, glass. 16,410 to 19,690 silver, 8,658 gold, 5,717. According to this passage, 'Mach' refers to
A.
the ratio of the air speed of an aircraft to the speed of sound.
B.
a machine.
C.
a Czech-born Australian physicist.
D.
the pilot of the plane.
手机使用
分享
复制链接
新浪微博
分享QQ
微信扫一扫
微信内点击右上角“…”即可分享
反馈
参考答案:
举一反三
【多选题】干热灭菌的条件是( )
A.
60-90℃,30分钟
B.
160℃,2小时
C.
170℃,1小时
D.
140℃,2小时
【单选题】干热灭菌的条件是
A.
100 ℃,1h
B.
120 ℃,2 h
C.
160 ℃,2h
D.
170 ℃,1h
【多选题】沟通是小组得以进行的重要动力,是小组组员互动的基础。一般而言,社会工作者在开展小组工作实务时,应熟练掌握与组员沟通的技巧以及促进组员沟通的技巧。与组员沟通的技巧应包括:()。
A.
营造轻松、安全的氛围
B.
专注于倾听
C.
积极回应
D.
适当帮助梳理
E.
考虑组员的特征及能力
【简答题】为了升级而调走 “你能到我的办公室来一趟吗,罗比?”工厂经理托克问道。 “可以,马上就来。”罗比应答。 罗比是工厂质量管理部门的负责人,来公司工作已有四年时间。在大学拿到机械工程学位后,他先后当过生产工长和维修车间主任,尔后提升到目前的职位。罗比心里明白托克的电话是为了什么。 “看到你的辞职信我很吃惊”,托克直截了当地说,“我知道威尔逊公司将得到一位好员工,但我们这里更需要你,真的,罗比。” “关...
【单选题】下列()不是沥青混凝土路面横向接缝的防治措施。
A.
将已摊铺的路面尽头边缘锯成垂直面,并与纵向边缘成直角
B.
预热已压实部分路面,以加强新旧混合料的粘结
C.
摊铺机起步速度要慢,碾压速度不宜过快
D.
将已摊铺混合料留10~20cm暂不碾压,作为后摊铺部分的高程基准面,待后摊铺部分完成后一起碾压
【单选题】干热灭菌的条件是:
A.
160-170℃,15-30 min
B.
160-170℃,1-2 h
C.
180-190℃,15-30 min
D.
180-190℃,1-2 h
【多选题】国内水路运输的缺点有( )
A.
成本较高
B.
运送速度慢
C.
受自然条件影响较大
D.
水网覆盖面积小
E.
安全性较低
【单选题】下列( )措施不是沥青混凝土路面横向接缝的防治措施。
A.
将已摊铺的路面尽头边缘锯成垂直面,并与纵向边缘成直角
B.
预热已压实部分路面,以加强新旧混合料的粘结
C.
摊铺机起步速度要慢,碾压速度不宜过快
D.
将已摊铺混合料留10~20cm暂不碾压,作为后摊铺部分的高程基准面,待后摊铺部分完成后一起碾压
【简答题】用于玻璃器皿干热灭菌的条件是 ,用于干热灭菌的设备是 。
【判断题】默示保证一般是国际惯例所通行的准则,习惯上或社会公认的被保险人应在保险实践中遵守的规则,而不载明于保险合同中。()
A.
正确
B.
错误
相关题目:
参考解析:
知识点:
题目纠错 0
发布
创建自己的小题库 - 刷刷题