皮皮学,免费搜题
登录
logo - 刷刷题
搜题
【简答题】
Just put your special clothes on in the morning and you could jump 3 meters into the air and even carry more than 60 kilograms without getting tired. The walk to school would be very , very easy. Such supercharged clothing is one of the products that could be created using “wearable robotics” technology. Designed to improve a person’s senses and skills, the device could be as simple as a hearing aid. Or it could be a full-body suit that senses what you’re going to do, then helps you do it better. “A superman suit would be the final result in wearable robotics,” said Francois Pin, head of robotics and energy systems at the Oak Ridge National Laboratory(橡树林国家实验室), US. While these suits are at least ten years away, in some areas the technology is already in use. Researchers are developing artificial arms and legs that allow old, disabled or injured people to move freely. Thus US Army is interested in using wearable robot legs to help soldiers run faster, carry more equipment and be stronger in battle. Jobs that involve lifting heavy loads or saving lives from the rubble of an earthquake could also become much easier. A robot is a device that responds to a command. You’re probably with simple robots, such as toy cars or airplanes that respond to buttons you push on a remote control. Wearable robotics goes further. Instead of just receiving information through a wire or remote control, the robotic device can send information back to its controller. Suppose you wore a sleeve that has sensors where your joints are. Every time you move your arm, the sleeve senses your movements and sends the information to a robot, which then moves its arm just as you did. When the robot hits or touches something, it sends a signal back to the sleeve and you sense the action. In this way, scientists are working to wrap the robot around the person. Their goal is to make the sleeve, shoe or suit help you do what you want to do. 小题1:Which of the following can replace the underlined word “ supercharged” in Paragraph one? A.expensive B.overcharged C.advanced D.full of electricity 小题2:Products resulting from this wearable robotics technology do not include ___________. A.remote controls B.hearing aids C.wearable robot legs D.superman suits 小题3:From the passage, we can infer that_______________. A.it will be ten years before robotic devices are in use B.the wearable robotics technology has been employed in some areas C.the robots in the robotic devices will do whatever you want to do D.people must become lazier and less healthier in the future
手机使用
分享
复制链接
新浪微博
分享QQ
微信扫一扫
微信内点击右上角“…”即可分享
反馈
参考答案:
举一反三
【单选题】Modem的功能是实现
A.
数字信号的整形
B.
模拟信号与数字信号的转换
C.
数字信号的编码
D.
模拟信号的放大
【单选题】1820年,( )和( )用实验证明了电流和磁场之间的关系。
A.
库伦和安培
B.
安培和奥斯特
C.
欧姆和法拉第
D.
奥斯特和欧姆
【单选题】有以下程序 void WriteStr(char*fn,char*str) { FILE*fp; fp=fopen(fn,"w");fputs (str,fp); fclose(fp);} main() { WriteStr("t1.dat","start"); WriteStr("t1.dat","end");} 程序运行后,文件t1.dat中的内容是______。
A.
start
B.
end
C.
startend
D.
endrt
【单选题】有以下程序,程序运行后,文件t1.dat中的内容是( )。 #include #include void WriteStr(char *fn,char *str) { FILE *fp; fp=fopen(fn,"w"); fputs(str,fp); fclose(fp); } int main( ) { WriteStr("t1.dat","start"); WriteStr("t1....
A.
start
B.
end
C.
startend
D.
endstart
【单选题】有以下程序 #include "stdio.h" void WriteStr(char *fn,char *str) { FILE *fp; fp=fopen(fn,"W"); fputs(str,fp); fclose(fp); } main() { WriteStr("t1.dat","start"); WriteStr("t1.dat","end"); } 程序运行后 , 文件 t1.dat...
A.
start
B.
end
C.
startend
D.
endrt
【单选题】有以下程序 #include void WriteStr(char *fn,char *str) { FILE *fp; fp=fopen(fn,"w");fputs(str,fp);fclose(fp); } main() { WriteStr("t1.dat","start"); WriteStr("t1.dat","end"); } 程序运行后 ,文件 t1.dat 中的内容是 ( )。
A.
start
B.
end
C.
startend
D.
endrt
【单选题】有以下程序 #include void WriteStr(char *fn,char *str) { FILE *fp; fp=fopen(fn,"w"); fputs(str,fp); fclose(fp); } main() { WriteStr("t1.dat","start"); WriteStr("t1.dat","end"); } 程序运行后 , 文件 t1.dat 中的内容是 ___...
A.
start
B.
end
C.
startend
D.
endrt
【单选题】1820年,( )和( )用实验证明了电流和磁场之间的关系。
A.
库仑和安培
B.
安培和奥斯特
C.
欧姆和法拉第
D.
奥斯特和欧姆
【单选题】有以下程序 #include "stdio.h" void WriteStr(char *fn,char *str) { FILE *fp; fp=fopen(fn,"w"); fputs(str,fp); fclose(fp); } int main(void) { WriteStr("t1.dat","start"); WriteStr("t1.dat","end"); return 0; }...
A.
start
B.
end
C.
startend
D.
endrt
【单选题】有以下程序 #include "stdio.h" void WriteStr(char *fn,char *str) { FILE *fp; fp=fopen(fn,"W"); fputs(str,fp); fclose(fp); } main() { WriteStr("t1.dat","start"); tob_id_5389 WriteStr("t1.dat","end"); } 程...
A.
start
B.
end
C.
startend
D.
endrt
相关题目:
参考解析:
知识点:
题目纠错 0
发布
创建自己的小题库 - 刷刷题