皮皮学,免费搜题
登录
logo - 刷刷题
搜题
【单选题】
听力原文: The economic costs of noise to society are several. Airports are currently operating at less capacity because of noise regulations which restrict their hours of operation.For instance, at Washington's National Airport jet traffic is not allowed from 11 pm to 7 am. Other airports restrict the use of certain runways.One estimate is that noise restrictions reduce possible airport use by 20 percent.The profitable cargo trade is especially affected by night restrictions In the case of airports,jet engines may be modified to reduce their noise level.One estimate is that $5.7 billion would be required to equip all existing jet engines with noise control devices.However, even taking this step will not reduce noise levels at a11 points to acceptable values.some combination of methods is probably necessary. If all aircraft were made quieter by existing methods, there would be a number of economic benefits.An increase in airport capacity would occur. Property values near airports might rise.Transportation costs to and from airports could be reduced since the airports now could be located closer to population centers. Much research still needs to be done on the economic aspects of noise reduction and noise effects, Although some of the effects of noise pollution are known,more must be discovered about its effects on health, productivity,property values and the quality of life.Furthermore,the cost of noise pollution to the economy as a whole needs to be investigated.The public must be alerted to the dangers and economic costs of noise pollution so that people may make intelligent choices and exert appropriate pressures. (30)
A.
It is extremely dangerous to fly in the dark.
B.
Noise regulations restrict the hours of airport operation.
C.
Some of its runways are not in good condition.
D.
Cargo planes produce more disturbing noises at night.
手机使用
分享
复制链接
新浪微博
分享QQ
微信扫一扫
微信内点击右上角“…”即可分享
反馈
参考答案:
举一反三
【单选题】在铸件的零件图中,过渡线用( )绘制。
A.
细实线
B.
粗实线
C.
虚线
D.
点画线
【单选题】在铸件的零件图中,过渡线用( )绘制。
A.
粗实线
B.
细实线
C.
虚线
【单选题】下列对零件铸造工艺结构描述正确的是:
A.
铸件对于有不同壁厚的要求时,可以不用逐渐过渡。
B.
由于铸造圆角的存在,铸件表面的交线就不十分明显了,这种线称为过渡线。过渡线在图中与铸造圆角的轮廓线相交并且用粗实线绘制。
C.
铸件表面相交处应有圆角,以免铸件冷却时产生缩孔或裂纹,同时防止脱模时砂型落砂。
D.
铸件在内外壁沿起模方向应有斜度 , 称为拔模斜度。当斜度较大时,在图中不予表示。
【多选题】下列关于企业盈利能力评价指标的说法中,正确的有( )。
A.
销售毛利率是指销售收入占平均资产总额的百分比
B.
销售净利率是指税后利润占销售收入的百分比
C.
资产净利率是指净利润占平均资产总额的百分比
D.
权益净利率是指净利润占平均所有者权益的百分比
E.
资产净利率是指销售净利润与资产周转率的乘积
【单选题】在铸件的零件图中,过渡线用( )绘制。
A.
粗实线
B.
细实线
C.
虚线
D.
none
【简答题】总资产周转率是企业在一定时期内销售收入同平均资产总额的比值,是综合评价企业全部资产的( )和( )的重要指标
【单选题】下列对零件铸造工艺结构描述正确的是:
A.
由于铸造圆角的存在,铸件表面的交线就不十分明显了,这种线称为过渡线。过渡线在图中与铸造圆角的轮廓线相交并且用粗实线绘制。
B.
铸件在内外壁沿起模方向应有斜度 , 称为拔模斜度。当斜度较大时,在图中不予表示。
C.
铸件表面相交处应有圆角,以免铸件冷却时产生缩孔或裂纹,同时防止脱模时砂型落砂。
D.
铸件对于有不同壁厚的要求时,可以不用逐渐过渡。
【单选题】下列对零件铸造工艺结构描述正确的是:
A.
铸件在内外壁沿起模方向应有斜度 , 称为拔模斜度。当斜度较大时,在图中不予表示。
B.
铸件表面相交处应有圆角,以免铸件冷却时产生缩孔或裂纹,同时防止脱模时砂型落砂。
C.
由于铸造圆角的存在,铸件表面的交线就不十分明显了,这种线称为过渡线。过渡线在图中与铸造圆角的轮廓线相交并且用粗实线绘制。
D.
铸件对于有不同壁厚的要求时,可以不用逐渐过渡。
【多选题】有关总资产周转率的表述,正确的是( )
A.
总资产周转率是考察企业资产运营效率的一项重要指标,反映企业一定时期的销售收入净额与平均资产总额之比
B.
总资产周转率是衡量资产投资规模与销售水平之间配比情况的指标
C.
总资产周转率能够体现企业经营期间全部资产从投入到产出的流转速度
D.
总资产周转率能够反映企业全部资产的管理质量和利用效率
【单选题】流动资产周转率指标反映流动资产的周转速度和营运能力,具体来讲,流动资产周转率指的是()
A.
净利润与流动资产之比
B.
销售收入与流动资产之比
C.
息税前利润与流动资产之比
D.
流动资产与资产总额之比
相关题目:
参考解析:
知识点:
题目纠错 0
发布
创建自己的小题库 - 刷刷题