皮皮学，免费搜题
登录
logo - 刷刷题
搜题
【简答题】
上颌的上壁为（）。|上颌的内侧壁为（）。|上颌的前壁有（）。|上颌的后外壁毗邻（）。|上颌的底壁为（）。 A. 翼腭窝、颞下窝 B. 尖牙窝 C. 眼眶底壁 D. 牙槽突 E. 鼻腔外侧壁下部
手机使用
分享
复制链接
新浪微博
分享QQ
微信扫一扫
微信内点击右上角“…”即可分享
反馈
参考答案：
举一反三
【简答题】nce2L76C: Composition [ref. at page 343 in nce2, lesson76]
查看完整题目与答案
【单选题】What feature should you look for in switches if your network is cabled like the one in Figure 8-16?
A.
VLANs
B.
Auto-negotiate
C.
STP
D.
Auto-MDIX
查看完整题目与答案
【单选题】If your network is currently congested and you are using only hubs in your network, what would be the best solution to decrease congestion on your network?
A.
Cascade your hubs.
B.
Replace your hubs with switches.
C.
Replace your hubs with routers.
D.
Add faster hubs.
查看完整题目与答案
【多选题】下列关于墙体材料的描述,合理的是( )。
A.
烧结多孔砖的所有孔宽应相等
B.
烧结多孔砖的孔洞排列上下、左右应对称
C.
烧结多孔砖的每块砖不允许出现严重泛霜
D.
烧结多孔砖的密度等级分为900、1000、1100和1200四个等级
查看完整题目与答案
【单选题】Your network contains two DHCP servers named Server1 and Server2.On Server1, you create a scope named Scope1.You need to ensure that DHCP clients receive IP addresses from the address range in Scope1 ...
A.
On Server1, create a superscope.
B.
On Server1, select Scope1, and then run the Split-Scope wizard.
C.
On Server2, create a scope, and then reconcile each scope.
D.
On Server2, create a scope, and then enable Network Access Protection.
查看完整题目与答案
【单选题】Your network contains a server named Server1. Server1 runs Windows Server 2008 R2 and has a single network connection. The connection is configured to use a default gateway address of 10.0.0.1.The def...
A.
For the interface, set the interface metric to 100.
B.
For the 10.0.0.2 gateway, set the metric to 50.
C.
For the 10.0.0.2 gateway, set the metric to 200.
D.
For the 10.0.0.1 gateway and the 10.0.0.2 gateway, enable automatic metric.
查看完整题目与答案
【单选题】Your network contains two DHCP servers named Server1 and Server2. Server1 and Server2 are located in the same subnet.You configure a split scope named Scope1 on the DHCP servers.You need to ensure tha...
A.
the Scope1 properties for Server1
B.
the Scope1 properties for Server2
C.
the server options for Server1
D.
the server options for Server2
查看完整题目与答案
【单选题】Your network has Network Access Protection (NAP) deployed. The network contains two servers named Server1 and Server2. Server1 is a Network Policy Server (NPS). Server2 has a third-party antivirus sol...
A.
SHA not responding to NAP client
B.
SHA unable to contact required services
C.
SHV not responding
D.
SHV unable to contact required services
查看完整题目与答案
【多选题】某施工企业全年完成总产值1168．8万元，年度耗用材料总量为888．29万元，其平均库存为151．78万元，核定周转天数为70d。现承包了某17层高层商住楼工程施工，基础采用螺旋钻灌注桩，基坑深度6m；上部为现浇钢筋混凝土框架一剪力墙结构；填充墙采用烧结多孔砖、多孔砌块和混凝土蒸压加气砌块；屋面采用卷材防水。 下列关于该工程墙体材料的描述，合理的是（）。
A.
烧结多孔砖的所有孔宽应相等
B.
烧结多孔砖的孔洞排列上下、左右应对称
C.
烧结多孔砖的每块砖不允许出现严重泛霜
D.
烧结多孔砖的密度等级分为900、1000、1100和1200四个等级
查看完整题目与答案
【单选题】You are the network administrator for The network consists if a single Active Directory domain named All network servers run Windows Server 2003, and all client computers run Windows XP Professional. ...
A.
In the System Properties dialog box, enable Remote Desktop.
B.
Add your user account to the Remote Desktop Users local group.
C.
In the System Properties dialog box, enable Remote Assistance.
D.
Install Terminal Services by using Add or Remove Programs.
查看完整题目与答案
相关题目：
【简答题】nce2L76C: Composition [ref. at page 343 in nce2, lesson76]
查看完整题目与答案
【单选题】What feature should you look for in switches if your network is cabled like the one in Figure 8-16?
A.
VLANs
B.
Auto-negotiate
C.
STP
D.
Auto-MDIX
查看完整题目与答案
【单选题】If your network is currently congested and you are using only hubs in your network, what would be the best solution to decrease congestion on your network?
A.
Cascade your hubs.
B.
Replace your hubs with switches.
C.
Replace your hubs with routers.
D.
Add faster hubs.
查看完整题目与答案
【多选题】下列关于墙体材料的描述,合理的是( )。
A.
烧结多孔砖的所有孔宽应相等
B.
烧结多孔砖的孔洞排列上下、左右应对称
C.
烧结多孔砖的每块砖不允许出现严重泛霜
D.
烧结多孔砖的密度等级分为900、1000、1100和1200四个等级
查看完整题目与答案
【单选题】Your network contains two DHCP servers named Server1 and Server2.On Server1, you create a scope named Scope1.You need to ensure that DHCP clients receive IP addresses from the address range in Scope1 ...
A.
On Server1, create a superscope.
B.
On Server1, select Scope1, and then run the Split-Scope wizard.
C.
On Server2, create a scope, and then reconcile each scope.
D.
On Server2, create a scope, and then enable Network Access Protection.
查看完整题目与答案
【单选题】Your network contains a server named Server1. Server1 runs Windows Server 2008 R2 and has a single network connection. The connection is configured to use a default gateway address of 10.0.0.1.The def...
A.
For the interface, set the interface metric to 100.
B.
For the 10.0.0.2 gateway, set the metric to 50.
C.
For the 10.0.0.2 gateway, set the metric to 200.
D.
For the 10.0.0.1 gateway and the 10.0.0.2 gateway, enable automatic metric.
查看完整题目与答案
【单选题】Your network contains two DHCP servers named Server1 and Server2. Server1 and Server2 are located in the same subnet.You configure a split scope named Scope1 on the DHCP servers.You need to ensure tha...
A.
the Scope1 properties for Server1
B.
the Scope1 properties for Server2
C.
the server options for Server1
D.
the server options for Server2
查看完整题目与答案
【单选题】Your network has Network Access Protection (NAP) deployed. The network contains two servers named Server1 and Server2. Server1 is a Network Policy Server (NPS). Server2 has a third-party antivirus sol...
A.
SHA not responding to NAP client
B.
SHA unable to contact required services
C.
SHV not responding
D.
SHV unable to contact required services
查看完整题目与答案
【多选题】某施工企业全年完成总产值1168．8万元，年度耗用材料总量为888．29万元，其平均库存为151．78万元，核定周转天数为70d。现承包了某17层高层商住楼工程施工，基础采用螺旋钻灌注桩，基坑深度6m；上部为现浇钢筋混凝土框架一剪力墙结构；填充墙采用烧结多孔砖、多孔砌块和混凝土蒸压加气砌块；屋面采用卷材防水。 下列关于该工程墙体材料的描述，合理的是（）。
A.
烧结多孔砖的所有孔宽应相等
B.
烧结多孔砖的孔洞排列上下、左右应对称
C.
烧结多孔砖的每块砖不允许出现严重泛霜
D.
烧结多孔砖的密度等级分为900、1000、1100和1200四个等级
查看完整题目与答案
【单选题】You are the network administrator for The network consists if a single Active Directory domain named All network servers run Windows Server 2003, and all client computers run Windows XP Professional. ...
A.
In the System Properties dialog box, enable Remote Desktop.
B.
Add your user account to the Remote Desktop Users local group.
C.
In the System Properties dialog box, enable Remote Assistance.
D.
Install Terminal Services by using Add or Remove Programs.
查看完整题目与答案
参考解析：
知识点：
题目纠错 0
发布
创建自己的小题库 - 刷刷题