【单选题】comparative/ kəm’pærətiv/
【多选题】关于总线(Bus),下列说法正确的是( )
A.
总线( Bus )通常分为数据总线、地址总线和控制总线三类,统称系统总线。
B.
数据总线用于在 CPU 与 RAM 之间来回传送需要处理或需要储存的数据。
C.
地址总线用来指定在 RAM 之中储存的数据的地址。
D.
控制总线用于将微处理器控制单元的信号,传送到周边设备。
E.
数据总线只能传输数据,即传统意义上的数和字符。
F.
控制总线是 CPU 内部运算器和控制器之间的通信线路。
【单选题】conservative/ kən’sə:vətiv/
【单选题】alternative / ɔ:l’tə:nətiv/
【多选题】关于总线(Bus),下列说法正确的是( )
A.
数据总线只能传输数据,即传统意义上的数和字符。
B.
控制总线是CPU内部运算器和控制器之间的通信线路。
C.
数据总线用于在CPU与RAM之间来回传送需要处理或需要储存的数据。
D.
总线(Bus)通常分为数据总线、地址总线和控制总线三类,统称系统总线。
【单选题】The most accurate method of determining gyrocompass error while underway is by ______.
A.
Comparing the gyro azimuth of a celestial body with the computed azimuth of the body
B.
Comparing the gyro heading with the magnetic compass heading
C.
Determining from the chart the course made good between celestial fixes
D.
It cannot be determined accurately at sea due to drift of unknown currents
【单选题】While underway and towing an unmanned tank barge you are required to ______.
A.
maintain a strict watch on the barge from the towing vessel
B.
fly a red flag from the towing vessel
C.
open the tops of all empty tanks on the barge
D.
take hourly soundings of any loaded tanks on the barge
【单选题】关于汽车CAN-BUS总线系统说法错误的是 。
【多选题】切削加工顺序安排时应考虑的几个原则有( )。
【单选题】While underway, which of the following would be the FIRST step in reversing a direct reversing large, low-speed, main propulsion, diesel engine?
A.
Manually trip the over-speed device
B.
Interrupt the fuel flow to the engine
C.
Disengage the safety interlock
D.
Slide the camshaft to the neutral position